Elements of belt conveyors, like other machine parts, are subject to wear processes. The conveyors transporting the spoil in the quartz sand mine are exposed to accelerated wear due to the effect of quartz on metal elements. Intensive wear of metal parts leads to downtime and the need to replace damage parts which generates additional costs. Therefore, it is important to perform surface treatment of metal elements, which will allow to extend the operation time of belt conveyors by reducing wear. The main objective of the article is to determine the impact of the pad welding process of the surface layer of metal elements on the abrasive wear of elements working in the metal–quartz sand–rubber conditions used in belt conveyors. In this research study, three different types of electrodes were used for pad welding the surface. The wear results obtained on the test stand were compared to wear of the basic element without surface treatment. The average wear value of the samples padded with electrode 3 was about 25% lower than the samples without surface treatment. The main mechanism of sample wear was the abrasion process due to the interaction between the steel surface and hard sand particles. The results presented in the article are important not only for belt conveyor elements but also for other machine parts where it is desirable to reduce abrasive wear.
Loading....